For labels

Face Stock for Adhesive Labels

Grade
SGS/Thickness: 60, 80, 110 μm

Face stock for letterpress printing

Applications
Face stock for various stickers and labels
  • Face stock for adhesive labels with high strength on the back side (adhesive surface)
  • High inter-laminar strength, suitable for removable labels.
  • Made to order only for roll products. Please contact us for details.
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Silk-screen printing
  • UV letterpress printing
Printing surface Single-sided
Front gloss Front (Printing surface) Matte
Back (adhesive surface) Semi-gloss
Product catalog available? No

Face Stock for Adhesive Labels [Compatible with Thermal Transfer Printing]

Grade
SGP/Thickness: 80, 110 μm

Face stock for letterpress printing/Product with improved thermal transfer suitability

Applications
Face stock for various stickers and labels
  • Face stock for adhesive labels with high strength on the back side (adhesive surface) that supports thermal transfer printing.
  • High inter-laminar strength, suitable for removable labels.
  • Made to order only for roll products. Please contact us for details.
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Silk-screen printing
  • UV letterpress printing
Printing surface Single-sided
Front gloss Front (Printing surface) Matte
Back (adhesive surface) Matte
Product catalog available? No

Easy De-Laminate YUPO

Grade
SAR/Thickness: 60 μm

Ideal for security labels

Applications
Anti-counterfeit labels, tamper-proof labels, seal labels, coupon labels, etc.
  • A type of face stock for adhesive labels that retains the picture/pattern printed on the rear adhesive layer.
  • Stickers can be peeled off from both the front and back surfaces.
  • You can print on both the "sticker side" and the "backing side" with freedom of design.
  • The thin film left on the adherend cannot be easily removed, so it is safe.
  • For more information, please contact us or see our dedicated catalogs.
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Silk-screen printing
  • UV letterpress printing
Printing surface Double-sided
Product catalog available? Yes (Please see the catalog download page)

Destructive YUPO

Grade
SLR/Thickness: 80 μm

Ideal for security labels

Applications
Anti-counterfeit labels, tamper-proof labels, seal labels, coupon labels, etc.
  • A type of face stock for adhesive labels that is destroyed if it is peeled off after affixing.
  • Handling is the same as general labels (you can print freely).
  • The substrate remaining on the adherend cannot be easily removed, so it is safe.
  • The suitability for labeling processing such as adhesive processing and removal of sticker backgrounds is equivalent to conventional YUPO.
  • For more information, please contact us or see our dedicated catalogs.
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Silk-screen printing
  • UV letterpress printing
Printing surface Single-sided
Product catalog available? Yes (Please see the catalog download page)

AQUAYUPO/AQUAYUPO [YUPO GREEN Series]

Grade
LAR/Thickness: 75, 95 μm
LARG/Thickness: 75, 95 μm

For glued-on labels/linerless labels

Applications
Labels on cylinders such as glass bottles, PET bottles, and other applications that take advantage of the water absorption function
  • This product is for glued-on labels and linerless labels.
  • The back surface can absorb water, allowing water-based adhesives to be used.
  • Labels affixed to containers can be removed neatly, which is useful for sorting and recycling.
  • For more information, please contact us or see our dedicated catalogs.
  • * LARG is a type of "YUPO GREEN", which reduces CO2 emissions by replacing some of the fossil fuel-derived resin, which is the main raw material, with plant-derived biomass resin. Click here for more details on the YUPO GREEN Series.
  • * LAR will no longer be available when stocks run out.
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing (Low energy UV lamp recommended)
  • Gravure printing
  • UV letterpress printing
  • UV flexo printing
Printing surface Single-sided
Front gloss Front (Printing surface) Semi-gloss
Back (water absorption surface) Matte
Product catalog available? Yes (Please see the catalog download page)

In-Mold Labels [For Blow/Injection Molding]

Grade
ITE/Thickness: 105 μm
ISF/Thickness: 105 μm
IDF/Thickness: 80, 100 μm
IHC/Thickness: 75 μm

For blow/injection molding

Applications
In-mold labels for blow molded containers, injection molded containers, lids, etc.
  • In-mold face stock for adhesive labels that supports simultaneous labeling and bottle molding.
  • Ideal for polypropylene and polyethylene (HD, LLD) containers.
  • Delivers clear and high quality printing effects. In addition, the appearance is improved by integration with the bottle.
  • There is almost no deformation after molding, and excellent container stacking is achieved due to the high quality finish.
  • Since there is no need for decoration after molding, the product offers reductions in labor requirements and improved economics.
  • Using an in-mold label increases the strength of the container and reduces the weight per unit area.
  • The label adheres to the entire surface, and there is no protrusion at the end, making it difficult to peel off. The label can be recycled together with the bottle without removing it.
  • For more information, please contact us or see our dedicated catalogs.
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Silk-screen printing
  • UV letterpress printing
  • UV flexo printing
Printing surface Single-sided
Product features ITE 105 Excellent in high-speed molding and wide area blister resistance compatibility.
ISF 105 Excellent in high-speed molding, wide area blister resistance compatibility, and anti-static performance.
IDF 80, IDF 100 Excellent orange peel resistance.
IHC 75 Transparent type with excellent orange peel resistance.
Product catalog available? Yes (Please see the catalog download page)

In-Mold Labels [For Injection Molding]

Grade
LBR/Thickness: 80 μm
FGS/Thickness: 80 μm

For injection molding

Applications
In-mold labels for injection molded containers, lids, etc.
  • In-mold face stock for adhesive labels that supports simultaneous labeling and bottle molding.
  • Excellent in wide area blister resistance compatibility.
  • For injection molding.
  • For more information, please contact us or see our dedicated catalogs.
Grade LBR 80 FGS 80
Printing method
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Gravure printing
  • Oil-based offset printing/(YUPO ink)
  • UV offset printing
  • Silk-screen printing
  • Gravure printing
Printing surface Single-sided Double-sided
Product features Excellent orange peel resistance and wide area blister resistance compatibility. Excellent in wide area blister resistance compatibility.
  • * Standard product "FGS" is used.
Product catalog available? Yes (Please see the catalog download page)

Please feel free to contact us.

Sample books and products of interest can be purchased through the sample request form.
Please feel free to contact us regarding any other inquiries.

Inquiries about products

+81-(0)3-5281-0813

Inquiries about the company or other matters

+81-(0)3-5281-0811 (Main Switchboard)

Hours: 9:00 to 12:00, 13:00 to 17:45
Japan Standard Time (excepting weekends and holidays)