Adhesive: Other (manual lamination Converting, etc.)
Applications for bonding YUPO products
Processing target
Memo pads and block memo pads
Covered*2
Compatible adhesives
<EVA hot melt>
HU-260 (Nitta Gelatin)
Applications for bonding YUPO products
Processing target
Memo pads and block memo pads
Coverless*1
Compatible adhesives
<EVA emulsion>
BX-646X (Touritsu Kasei)
Applications for bonding YUPO products
Processing target
Memo pads and block memo pads
Covered*2
Compatible adhesives
<EVA emulsion>
BX-646X (Touritsu Kasei)
Applications for bonding YUPO products
Processing target
Sheet-fed forms
Using YUPO
Compatible adhesives
[Glued pad binding (brush application)]
<EVA emulsion>
BX-646X (Touritsu Kasei)
Applications for bonding YUPO products
Processing target
Sheet-fed forms
Using YUPO carbonless*3
(triage tags)
Compatible adhesives
Applications for bonding YUPO products
Processing target
Continuous slips [collator]
Applications for bonding YUPO products
Processing target
Envelope bags*4 [hand-sealed]
Compatible adhesives
<EVA emulsion>
BX-646X (Touritsu Kasei)
Applications for bonding YUPO products
Processing target
Envelope bags*4 [hand-sealed]
Compatible adhesives
<Double-sided tape>
For general use
Applications for bonding YUPO products
Processing target
Calendars*9
[Strip processing/Eco-cut processing]
Compatible adhesives
<EVA hot melt>
CL-53A (Sekisui Fuller)
YUPO/Hygroscopic material bonding
Compatible adhesives
<EVA emulsion>
BA-10L, BA-20 (Japan Coating Resin)
BX-646X (Touritsu Kasei)
YUPO/Hygroscopic material bonding
Processing target
Pasting posters
Bulletin boards
Compatible adhesives
<Double-sided tape>
For general use
YUPO/Hygroscopic material bonding
Processing target
Pasting posters
Rough surfaces such as concrete
Compatible adhesives
<Double-sided tape*5>
NW-N-20 (Nichiban)
YUPO/Hygroscopic material bonding
Processing target
Sheet-fed forms
Paper/YUPO*6
Compatible adhesives
[Glued pad binding (brush application)]
<EVA emulsion>
CX-1874 (Touritsu Kasei)
YUPO/Hygroscopic material bonding
Processing target
Sheet-fed forms
High quality carbonless paper/YUPO carbonless*7
Compatible adhesives
<Setting glue>
Suitable for high quality carbonless paper.
[Glued pad binding (brush application)]
Bond B-77 (Konishi)
YUPO/Hygroscopic material bonding
Processing target
Continuous slips [collator]
Paper/YUPO
Compatible adhesives
<Acrylic rubber emulsion>
YUPO/Hygroscopic material bonding
Processing target
Continuous slips [collator]
High quality carbonless paper/YUPO carbonless
Compatible adhesives
<Adhesive glue for forms>
Suitable for high quality carbonless paper.
YUPO/Non-hygroscopic material bonding
Processing target
Pasting posters*8
Metal plates
Compatible adhesives
<Double-sided tape>
For general use
YUPO/Non-hygroscopic material bonding
Processing target
Pasting posters*8
Plastic cardboard
Compatible adhesives
<Double-sided tape>
For general use
YUPO/Non-hygroscopic material bonding
Processing target
Labels [Hand-pasted (bottles and cans)]
Compatible adhesives
<YUPO adhesive processed products>
Please consult with an adhesive converter company.
YUPO/Non-hygroscopic material bonding
Processing target
Labels [Hand-pasted (bottles and cans)]
Compatible adhesives
<Acrylic emulsion>
CE330 (Konishi)
Special applications
Processing target
YUPO self-sticking envelopes
Compatible adhesives
<Double-sided tape>
Tohcello Pack No.101 (Mitsui Chemicals Tohcello)
Special applications
Processing target
Pasting YUPO and polystyrene sheets
(display panels, etc.)
Compatible adhesives
For large quantities⇒ Machine pasting (wet laminating machine)
(1) Laminate polystyrene sheets and high-quality paper first (water-based adhesive)
(2) Laminate printed YUPO on high-quality paper side (same adhesive as (1))
(3) Laminating on a single side only causes warpage, so paste waste paper on the reverse side.
For small quantities⇒Manual pasting
· Paste the polystyrene sheet coated with adhesive coating and the YUPO printed matter.
· Paste the YUPOTACK printed matter on the polystyrene sheet.
Special applications
Processing target
Lamination of YUPO and plywood
(trinket boxes, veneers, bulletin boards, etc.)
Compatible adhesives
<EVA emulsion>
BX-646X, CX-1874 (Touritsu Kasei)
- *1 Carry out linear fusion using a heat trowel.
- *2 Use the same method for adhesive binding.
- *3 Test before use.
- *4 Cylinder adhesion and base adhesion together
- *5 Use a thick adhesive layer.
- *6 Application by sponge
- *7 Application by brush
- *8 Points to remember for pasting posters
When pasting a poster on a hard surface, such as sheet of metal or glass, any water between YUPO and the surface it comes into contact with will evaporate rapidly with high heat, and as a result, YUPO will be firmly fixed to the contact surface, so in some cases, the coating may peel off when the poster is removed. This phenomenon is not restricted to YUPO, and is common to film-coated items. For example, when attaching a poster using double-sided tape, it is necessary to ensure that water does not accumulate between the contact surface and YUPO. - *9a) Use thick paper for the strip that wraps the binding area.
b) In addition to the strip method, metal winding and ring binding can also be used.