Search by Thickness: 60 to 95 μm
Standard
- FGS60, 80, 95 μm
- Standard
Improved dust/For oil-based/UV offset
A general-purpose product with a wide variety of thicknesses.
- FEBG95μm
- Standard
Fast drying and clear printing with YUPO ink
In addition to the features of previous products, this product reduces CO2 emissions by replacing some of the fossil fuel-derived resin, which is the main raw material, with plant-derived biomass resin.
- FRRG70μm
- Standard
Fast drying and clear printing with YUPO ink
In addition to the features of previous products, this product reduces CO2 emissions by replacing some of the fossil fuel-derived resin, which is the main raw material, with plant-derived biomass resin.
- FPG60μm
- Standard
For oil-based offset
A general-purpose product that was widely used until General YUPO was launched.
Translucent
- TPRA60, 90 μm
- Translucent
Translucent product with excellent durability
A thin translucent product. Both sides are suitable for handwriting.
For labels
- SGS60, 80 μm
- For labels
Face stock for letterpress printing
A face stock for adhesive labels that offers both suitability for letterpress printing and suitability for adhesive processing.
- SGP80μm
- For labels
Face stock for letterpress printing/Product with improved thermal transfer suitability
A face stock for adhesive labels with improved heat transfer printing suitability.
- SGM80μm
- SDI80μm
- For labels
Face stock for stickers/Product with improved suitability for printing
In addition to improving suitability for conventional printing, this face stock for adhesive labels offers improved suitability for industrial digital printing machines.
- SAR60μm
- For labels
Ideal for security labels
A type of face stock for adhesive labels that retains the picture/pattern printed on the rear adhesive layer.
- SLR80μm
- For labels
Ideal for security labels
A type of face stock for adhesive labels that is destroyed if it is peeled off after affixing.
- LARG75, 95 μm
- For labels
For glued-on labels/linerless labels
In addition to the features of previous products, this product reduces CO2 emissions by replacing some of the fossil fuel-derived resin, which is the main raw material, with plant-derived biomass resin.
- IHC75μm
- For labels
For blow/injection molding
A transparent type face stock for in-mold labels with excellent orange peel resistance.
- IDF80μm
- For labels
For blow/injection molding
A face stock for in-mold labels with excellent blister resistance and orange peel resistance.
Coated
- VIF70, 90 μm
- VIS90μm
- Coated
Compatible with dot matrix printers/seals/water-based pens
Ideal for dot matrix printers, water-based pens, and imprint paper. This product is for single-sided printing.
Other
- VCA/VCB/VCC65μm
- Other
Pressure-sensitive copy paper.
YUPO's pressure-sensitive copy paper. When you write on the upper paper (VCA), it is copied to the middle paper (VCB) and lower paper (VCC).