 |
 |
|
 |
 |
|
|
A grade compatible with
offset printing using regular paper ink. |
|
|
 |
|
| |
Can be used with regular paper ink
- None of the distinctive smell of special formulated
inks for YUPO®. (when using regular
paper ink)
- Has improved sharpness, gloss and high-quality
feel, which creates new possibilities for printing.
- Outstanding color reproducibility and improved
gloss. Dot gain is equivalent to standard coated
paper, with less dot distribution than before.
- For one-sided printing. (printing on glossy surface)
Significant improvement in printing quality
- Improved drying speed when printed using either
regular paper ink as well as specially blended inks
for YUPO®.
- Setting time has been significantly decreased
to 2-3 hours. Additional work on printed paper can
be done on same day of printing.
- Minimal paper dust, enabling continuous printing
of over 5,000 sheets.
- Adjusts the dampening water level as same as standard
YUPO®.
- Spray powder volume can be same as that of coated
paper.
Strength and gentleness not found in standard paper
- Qualities, such as outstanding water-resistance
and durability, are equivalent to those of standard
YUPO®.
- No worries about peeling or wrinkling due to water
absorption at paper edge.
Comparison between FRB and coated paper
|
Comparison with competitive products. (using
regular paper ink)
 |
| |
- How to determine the printing surface. (indicated
on the product packaging)
| (1) |
The side with the glossy finish. |
| (2) |
The side that is difficult to write on
with a pencil. |
- When using regular paper ink, ink
can sometimes be removed by scratching. Be careful
not to scratch the printed surface. If your application
requires strong resistance to scratching (maps,
bags, etc.), please follow the following procedures:
| a. |
Use a regular paper ink with resistance
to heavy friction, such as ink for cartons.
Alternatively, you may add an appropriate
volume (approximately 5%) of polyethylene-type
membrane strengthener. |
| b. |
Use a rub-resistant overprint varnish. |
| c. |
Use an ink designed for YUPO®. |
| * |
The above measures increase in effectiveness
in the order of c, b, a. |
- Use of an appropriate quantity of dampening
water is essential. Use the same volume of dampening
water as you would for standard YUPO®.
Take special care to restrict the amount of dampening
water in the generating cylinder.
- Depending on seasonal factors, printing conditions
or ink type (high-tack or quick-drying), poor
ink transfer may occur. For example, to reduce
ink tack, add varnish or other additives.
- Cannot be used for flat-press laminates (such
as coasters). Both the front and back are compatible
for print laminates.
When printing, use proper care during pre-press
set-up and proceed with printing while taking proper
consideration of the requirements
for each type of printing.
A better and more attractive finished product can be
obtained by taking care to protect
the printing surface. |
| |
General posters, elections posters, hanging
displays, calendars, bags, etc. |
|
|
|
|
|
