 |
 |
|
| When selecting inks, be sure to ascertain the required
performance of the inks according to the application
then consult your ink manufacturer. |
 |
Oil-based offset printing
/ Inks designed for YUPO® (FPG etc) |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
BEST SP |
| DIC |
POP-K |
| TOYO INK |
TSP-400 |
|
| Note: |
Be sure to use inks designed for YUPO® for
silver ink. |
| Note: |
There is no inks designed for YUPO® specified
for gold ink and therefore this poses the risk of solvent
attack. |
| Note: |
Metallic inks emulsify easily and therefore
a minimum of Dampening water should be used when printing with
these. |
| Note: |
Be sure to adjust the printing pressure
by increasing it slightly. These inks have less transferability
than process inks. |
| Note: |
When gold ink comes into contact with
other inks, oxidation can be caused by the gas produced
in the drying process, which may result in blackening.
Instead of gold ink, please use T&K TOKA's imitation
gold ink. This is a mixture of YUPO®-compatible silver
ink, YUPO®-compatible yellow, and YUPO®-compatible reddish-gold. |
|
|
Oil-based offset printing
/ Synthetic paper inks (ULTRAYUPO®, FEB) |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
BEST SP |
| Dainichiseika Color and Chemicals |
LITHOREX SP |
| DIC |
POP-K, POP-VIP |
| Tokyo Printing Ink |
NEW CERVO Synthetic Paper |
| TOYO INK |
TSP-400 |
|
| Note: |
When using gold or silver inks,
be sure to refer to the section concerning inks designed for YUPO®. |
|
|
|
Recommended oxidation offset inks from European region. (Reference Only) |
| |
(Products listed in bald faced letters are especially recommended) |
|
|
| Manufacturer |
Product Name/Grade |
| BRANCHER |
KROMOPLAST |
| COLORGRAF |
C.M. Series |
| EPPLE DRUCKFARBEN |
FOIL |
| FLINT - SCHMIDT |
ARROWSTAR FOIL |
| HOSTMANN STEINBERG |
5080 CORONA LABEL |
| HARRY KOEHNE |
OFFSET FILM |
| MICHAEL HUBER MUNCHEN |
5080 CORONA LABEL |
| JANECKE SCHNEEMAN |
ANCOR FOLIEN |
| O&R INKTCHEMIE |
ORDYTH HIGH SOLID |
| SAKATA INX |
SSP - 707 |
| SICPA |
PLASTOFFSET - TEMPOPLAST |
| SIEGWERK |
HB |
| SUNCHEMICAL HARTMANN |
UNIPLAST |
| SUNCHEMICAL GIBBON |
POLIBONDII |
| TORDA |
BIO TECH GLOSS |
| VAN SON |
THOUGHTEX LR |
|
| Note: |
Please refer to the “Technical Notes by Printing Method” page for more information on printing on YUPO®. |
| Note: |
Always make sure to perform pre-test to check ink’s compatibility with YUPO® and your final application. |
|
|
Oil-based offset printing
/ Ordinary paper inks (SUPERYUPO®, FRB) |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
Super TEKPLUS, Super TEK GT M-SOYA |
| SAKATA INX |
DT Ecopure Soy Process-JHP |
| DIC |
FUSION-G EZ, NS SOYBI |
| Tokyo Printing Ink |
SOY CERVO, NEW CERVO QD, NEW CERVO 100 |
| TOYO INK |
TK NEX-P |
|
|
Oil-based offset printing
/ SUPERYUPO®, FRR |
|
|
| Color Layers |
By Type |
Manufacturer |
Product Name/Grade |
| Up to 2-color layers |
For Plain Paper |
T&K TOKA |
Best One GIGA |
| SAKATA INX |
DTI Pure SOY JHP, JHPRR |
| Dainichiseika Color and Chemicals |
Please inquire directly to the manufacturer |
| Tokyo Printing Ink |
NEW CERVO, NEW CERVO QD |
| TOYO INK |
TK NEX-P |
| For Carton Paper |
T&K TOKA |
Best Carton |
| SAKATA INX |
DT Carton Master |
| Dainichiseika Color and Chemicals |
Please inquire directly to the manufacturer |
| DIC |
Carton Self |
| Tokyo Printing Ink |
New CA-2 |
| TOYO INK |
CK Win Echo |
| Soybean oil-based inks |
T&K TOKA |
Super Tekplus SOY-e |
| SAKATA INX |
DT Ecopure SOY JHP |
| Dainichiseika Color and Chemicals |
Please inquire directly to the manufacturer |
| DIC |
Naturalis 100 |
| Tokyo Printing Ink |
NEW CERVO 100 |
| TOYO INK |
TK NEX-P |
| Up to 4-color layers |
For Synthetic Paper |
T&K TOKA |
Best SP |
| Dainichiseika Color and Chemicals |
LITHOREX SP |
| DIC |
POP-K |
| Tokyo Printing Ink |
NEW CERVO (For Synthetic Paper) |
| TOYO INK |
TSP400 |
| For Specialty Paper |
T&K TOKA |
Best One (for Specialty Paper) |
| Dainichiseika Color and Chemicals |
LITHOREX CH (for Specialty Paper) |
| DIC |
Naturalis 100 |
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
UV 161, UV VNL |
| DIC |
RT-21YP, RT-V |
| TOYO INK |
FDO New HF-1 |
|
|
Recommended UV offset printing inks from European region. (Reference Only) |
|
|
| Manufacturer |
Product Name/Grade |
| BRANCHER |
PHOTON S LAM |
| COLORGRAF |
DELTACURE SYNT |
| FLINT - SCHMIDT |
UF 8160 SERIES - UV |
| HOSTMANN STEINBERG |
CURE INK UV |
| HOSTAG STEHLIN |
CURE INK UV |
| MICHAEL HUBER MUNCHEN |
CURE INK UV |
| JANECKE SCHNEEMAN |
SUPRA UV |
| SICPA |
SICURA PLAST 770 |
| SICPA |
UVPLAST |
| SIEGWERK |
SICURA PLAST 770 |
| SUNCHEMICAL HARTMANN |
SUNCURE PLAST |
| SUNCHEMICAL GIBBON |
SUPRAPLAS |
|
| Note: |
Please refer to the “Technical Notes by Printing Method” page for more information on printing on YUPO® by offset,. |
| Note: |
Always make sure to pre-test to check ink’s compatibility with YUPO® and your final application. |
|
|
Waterless lithographic
printing |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
ALPO (for Synthetic Paper) |
| DIC |
DRI-O-COLOR (for Synthetic Paper) |
|
| Note: |
It is necessary that at least the inking
rollers in the printing press have a cooling function
and that the temperature can be controlled. This prevents
problems such as unstable ink transfer and scumming. |
| Note: |
Since dampening water is not used, problems
involving static electricity may occur. Be sure that
the humidity of the printing room is kept at 55% or
more. |
|
|
Solvent drying silk screen
printing (reference only) |
|
|
| Manufacturer |
Product Name/Grade |
| Jujo Chemical |
SP, PAS, DRM, 5100
SERIES AQUA SET |
| Seiko Advance |
ACT, ABS, PP, SG-740 |
| Teikoku Printing Inks |
CG, NAN, EG+101, EGR+96, POS, AQUA QL, AQUA PAW |
| TOYO INK |
SS-16, SS-66, SSPPNK |
| MINO GROUP |
U-PET, High Set G |
|
| Recommended grades: YUPO® FEB, FGS, FPU, SGS, KPK,
QJJ, and others. |
|
|
UV silk screen printing
(reference only) |
|
|
| Manufacturer |
Product Name/Grade |
| Jujo Chemical |
OP, UM |
| Seiko Advance |
HUG, PZU, UVA |
| Teikoku Printing Inks |
UV-PAC(S), UV-IPO, AQUA UV-MAX |
| TOYO INK |
FDSS-46 |
| Nagase Screen Printing Research |
SPS |
|
| Recommended grades: YUPO® FEB, FGS, FPU, SGS, KPK,
QJJ, and others. |
|
|
Recommended UV silk screen printing in on YUPO® FPU from European region. (Reference Only) |
|
|
| Manufacturer |
Ink type |
Product |
| Encres DUBUIT |
UV |
GRAPHIBORAD |
| Encres DUBUIT |
UV |
MULTIPRINT |
| MARABU |
Solvent |
Marastar SR |
| MARABU |
UV - glossy / flexible |
Ultrastar UVS |
| MARABU |
UV - glossy |
Ultrastar UVP |
| MARABU |
UV - matte |
Ultrastar-M UVSM |
| SERICOL |
UV |
Multidyne LY |
| SERICOL |
UV |
Hiflex ES |
| SERICOL |
UV |
Multiflash UZ |
| SERICOL |
Solvent |
Colorstar CS |
| SERICOL |
Solvent |
Seristar SX |
| SERICOL |
Solvent |
Seripol SO |
| COATES SCREEN |
UV |
UVP |
| COATES SCREEN |
UV |
NEU-UVP |
| COATES SCREEN |
Solvent |
Euroglaze |
| AFFORD IND.- SPAIN |
UV |
SERIE 90 |
| AFFORD IND.- SPAIN |
UV |
SERIE 93 |
| AFFORD IND.- SPAIN |
UV |
SERIE 99 |
| VISPROX |
Solvent |
SET 4000 |
|
| Recommended Grade: FPU |
|
| Note: |
Always perform preliminary tests to check machine, speed and adhesion. |
| Note: |
Be sure to check the end use requirement related to the inks, such as weather and sunlight resistance, scratch resistance, etc. |
|
|
UV letterpress (seal printing) |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
UV 161 |
| Kuboi Ink |
UV-HS |
| DIC |
DC-MV Z for labels |
| TOYO INK |
FDS-TK |
|
|
Sheet-fed letterpress printing |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
Best SP |
| DIC |
POP-K |
| TOYO INK |
TSP-400 |
|
|
Business form printing
/ UV offset forms (reference only) |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
UV 161 |
| DIC |
DC-Scepter SL |
| TOYO INK |
FDS-TK |
|
|
Business form printing
/ UV letterpress forms (reference only) |
|
|
| Manufacturer |
Product Name/Grade |
| T&K TOKA |
UV 161 |
| DIC |
DC-MV Z for labels |
| TOYO INK |
FDS-TK |
|
|
|
|
|
