| Processing method |
Applictions |
Compatible adhesives |
| Applications
for bonding YUPO® products |
Memo pads and
block memo pads |
Coverless*1 |
EVA hot melt
HU-260 and HU-280 (Nitta Gelatin) |
EVA emulsion
SP7 (Konishi)
EH-004(Nitta Gelatin) |
| Covered*2 |
EVA hot melt |
| HU-260 and HU-280 (Nitta Gelatin) |
EVA emulsion
SP7 (Konishi)
EH-004 (Nitta Gelatin) |
| Sheet-fed forms |
Using YUPO® |
EVA emulsion
EH-004 (Nitta Gelatin) |
Using YUPO® carbonless*3
(triage tags) |
Setting glue
Tennori-92 (Oji Paper) |
| Collated continuous forms |
| Hand-sealed envelopes*4 |
EVA emulsion
SP7 (Konishi)
EH-004 (Nitta Gelatin) |
Double-sided tape
Can be used for general purposes |
| Standing calendars |
EVA emulsion
SP7 (Konishi)
EH-004 (Nitta Gelatin) |
Acrylic emulsion
DB-153A (Saiden Chemical) |
| Binding YUPO® with absorbent
materials |
|
PVA emulsion
AC-500 (CSC) |
EVA emulsion
SP7 (Konishi)
BA-10E (Chuo Rika)
EH-004 (Nitta Gelatin) |
| Pasting posters |
Billboards |
Double-sided tape
Can be used for general purposes |
| Rough surfaces, such as concrete |
Double-sided tape*5
NW-N-20 and #851(Nichiban) |
| Sheet-fed forms |
Paper/YUPO®*6 |
EVA Emulsion
EH-004(Nitta Gelatin) |
| Carbonless bond quality paper/YUPO® carbonless*7 |
Setting glue
Suitable for bond quality carbonless paper |
| Collated continuous forms |
Paper/YUPO® |
Acrylic rubber emulsion
AT-14N (Saiden Chemical) |
| Bond quality carbonless paper/YUPO® carbonless |
Adhesive glue for forms
Suitable for bond quality carbonless paper |
| Binding YUPO® with non-absorbent
materials |
Pasting posters*8 |
Metal sheets |
Double-sided tape
Can be used for general purposes |
| Plastic boxes |
| Hand-pasted labels on cans
on bottles |
Products processed with YUPO® adhesives
Consult the manufacturer of the adhesive converter |
EVA emulsion
EH105 Series (Nitta Gelatin) |
Acrylic emulsions
CE330 (Konishi)
LM-2 (Saiden Chemical) |
| Special applications |
YUPO® self-sticking envelopes |
Double-sided tape
Tohcello Pack 161 (Tohcello) |
Pasting YUPO® and polysterene sheets
(display panels, etc.) |
EVA emulsion
EH-1600 and EH-004 (Nitta Gelatin) |
Pasting YUPO® and plywood
(trinket boxes, veneers, billboards, etc.) |
| *1 |
Carry out linear fusion using a heat
trowel. |
| *2 |
Use the same method for adhesive binding. |
| *3 |
Test before use. |
| *4 |
Cylinder adhesion and base adhesion together |
| *5 |
Use a thick adhesive layer. |
| *6 |
Application by sponge |
| *7 |
Application by brush |
| *8 |
Points to remember for pasting posters
When pasting a poster on a hard surface, such as sheet
of metal or glass, any water between YUPO® and the surface
it comes into contact with will evaporate rapidly with
high heat, and as a result, YUPO® will be firmly fixed
to the contact surface, so in some cases, the coating
may peel off when the poster is removed. This phenomenon
is not restricted to YUPO®, and is common to film-coated
items. For example, when attaching a poster using double-sided
tape, it is necessary to ensure that water does not
accumulate between the contact surface and YUPO®. |
