| |
*YUPOTACK® SGS (after tack-converted) are recommended
- When selecting an ink, ensure that you consult
with the ink manufacturer.
- To avoid miss registration, use a low-heat lamp
(water-cooled or infrared-filtered type).
- Although a direct pressure press, semi-rotary
press or rotary press can all be used, for solid
patterns a semi-rotary press or rotary press is
recommended.
- An ink that is softer than ink for coated paper
will provide greater ink transferability.
- If UV irradiation is insufficient, ink adhesiveness
may be insufficient immediately after printing.
Please confirm beforehand.
- If the paper surface is cold, condensation may
occur, leading to poor ink transferability. To
avoid this problem, warm the paper surface beforehand.
- To avoid miss registration, set the tension
at the lowest possible level.
|
